Products > Computer to Plate >

Computer to Plate Metal Product Specification - ECRM Mako 8 Specs

Plate Sizes
Maximum: 32.4” x 45.0” (824 mm x 1143 mm)
Minimum: 10.0" x 10.0" (254 mm x 254 mm)

Media Types
Violet sensitive (405 nm) photopolymer and
silver halide metal plates.

Recording Source
Violet laser diode (405 nm), available for silver halide or photopolymer plates.

Resolutions
Resolutions from 1800 to 3556 dpi.
Resolution sets dependent on media type.

Image Scaling
Image scaling from 85% to 110% of original.

Repeatability
0.001” (0.025 mm) typical over six consecutive separations on plate.
May vary according to media type and processing conditions.

Environmental
Power: 100 – 240 Volts;
3 Amps; 250 Watt maximum;
50/60 Hz, single phase;
Heat dissipation: 850 BTU/hour.
Weight 900 lbs (409 kg).

Operating Conditions
62 – 86° F (17 – 30° C); relative humidity 45 – 65%, noncondensing.
Relative Humidity outside of this range may affect performance.
Operating conditions outside plate media specifications may affect performance.