Products > Computer to Plate >

Computer to Plate Metal Product Specification - ECRM Mako 4 Specs

Plate Sizes
Maximum: 25.4" x 37.8" (645 mm x 960 mm)
Minimum: 8.9" x 9.9" (228 mm x 252 mm)

Media Types
Violet-sensitive (405 mm) photopolymer or
silver halide metal plates

Media Thickness
0.0055" to 0.012" (0.14mm to 0.3mm)

Recording Source
Violet laser diode (405 nm), available for photopolymer or
silver halide metal plates

Resolutions
Resolutions from 1200 dpi to 3556 dpi (472 to 1400 dpcm)
Resolution sets dependant on media type

Repeatability
0.001" (0.025 mm) typical over six consecutive separations on plate.

Processing
Online: The plate transport automatically moves the plate into the processor.

Environmental
Power: 90 -264 Volts; 3 Amps; 250 Watt maximum; 50/60Hz, single phase
Heat Dissipation: 850 BTU/hour
Weight: 320 lbs (145.5 kg)

Operating conditions
62°F to 86°F (17°C to 30°C); relative humidity 45-65%, non-condensing.
Relative humidity outside of this range may affect performance.
Environmental Conditions outside the plate media specifications may affect performance.